| Device Name | Freescale Semiconductor MC9S08GT16CB |
| Manufacturer | Freescale Semiconductor |
| Part Number | MC9S08GT16CB |
| 8-bit Bytes | 65536.0 |
| Vcc(program) | 3 |
| Set programming | nan |
| Memory Regions | nan |
| Electrical Erase | Yes |
| Packages | DIP(42) |
| Notes | IMPORTANT: The following describes the buffer setup:Addresses $C000-$FFFF are FLASH.There are some location reserved in the FLASH memory map.The following are reserved addresses: $FFB8-$FFBC and $FFBE.These locations will be ignored during Program Read and Verify.Erase command will be erase entire FLASH memory map included reserved memory.To secure the device use SECURE command.Erasing the device will erase the clock trim values stored at location $FFBE.If these values need to be saved on blank devices from the Factorydisable Erase before Program.This algorithm does not program the ICG trim at address $FFBE. |
| Programmer | 2710 |
| Socket Modules | SM56SDB |
| Device Name with Package | Freescale Semiconductor MC9S08GT16CB DIP(42) |
| Device Name with Package and Adapter | Freescale Semiconductor MC9S08GT16CB DIP(42) SM56SDB |