| Socket Adapter (click to buy) | Description | Package | Devices Supported | Adapter Capacity per Site | Sockets per Adapter | Adapter Price | Replacement Socket Card | 2900L, 3910, 4910, 3928, 3901, 3900, 2900, 4900, 1900 | 3710-MK2, 4710 | 3610, 4610 | 1710, 2710M, 2710 | 2610, 1610 |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| ASMR80LQFR | Automated SOCKET MODULE, 80 PIN QFP | QFP(80) | 4 | 1 | 1 | $1,325.00 | LX2ASMR80LQFR | ✔ | ✔ | ✔ | ✔ | |
| FX2ASMR80LQFR | Automated SOCKET MODULE, 80 PIN QFP | QFP(80) | 4 | 1 | 1 | $2,140.00 | LX2ASMR80LQFR | ✔ | ✔ | |||
| FX2SMR80LQFR | SOCKET MODULE, 80 PIN QFP | QFP(80) | 4 | 1 | 2 | $1,910.56 | LX2ASMR80LQFR | ✔ | ||||
| LX2ASMR80LQFR | Automated REPLACEMENT D-CARD | QFP(80) | 4 | 2 | 1 | $969.44 | ✔ | |||||
| SM80TQ14 | SOCKET MODULE, 80 PIN TQFP, | QFP(80) | 49 | 1 | 1 | $859.65 | ✔ | ✔ | ||||
| SMR80LQFR | SOCKET MODULE, 80 PIN QFP | QFP(80) | 4 | 1 | 1 | $1,070.00 | LX2ASMR80LQFR | ✔ | ✔ |
| Device Name | Freescale Semiconductor MC9S08AC128CLK |
| Manufacturer | Freescale Semiconductor |
| Part Number | MC9S08AC128CLK |
| 8-bit Bytes | 507904.0 |
| Vcc(program) | 5 |
| Set programming | nan |
| Memory Regions | 20F0h-3FFFh; 4000h-7FFFh; 8000h-A0EFh; C000h-FFFFh; 28000h-7BFFFh; |
| Electrical Erase | Yes |
| Packages | QFP(80) |
| Notes | IMPORTANT: The following describes the Data Pattern setup: Addresses [$20F0-$3FFF] are FLASH PPAGE-0. Only 7952 Bytes are supported in PPAGE-0. Addresses [$4000-$7FFF] are FLASH PPAGE-1. Addresses [$8000-$A0EF] are FLASH PPAGE-0. Only 8432 Bytes are supported in PPAGE-0. Addresses [$C000-$FFFF] are FLASH PPAGE-3. Addresses [$28000-$2BFFF] are FLASH PPAGE-2. Addresses [$48000-$4BFFF] are FLASH PPAGE-4. Addresses [$58000-$5BFFF] are FLASH PPAGE-5. Addresses [$68000-$6BFFF] are FLASH PPAGE-6. Addresses [$78000-$7BFFF] are FLASH PPAGE-7. There are some reserved locations in the FLASH memory map. The following are reserved addresses:[$FFB8-$FFBB] $FFBC and $FFBE. These locations will be ignored during Programand Verify. Erase command will be erase entire FLASH memory map included reserved memory. The lower two bits (Bit1 and Bit0) at address $FFBF are security bits (SEC01:SEC00). They are ignored during Program and Verify and read 1:0 if unsecured during Read and Compare. To secure the device use SECURE command. During Erase factory programmed trim value at addresses $FFBC and $FFBE will be saved first and restored at the end. Erase will fail if the device is secured. If the device fails erase the Factory Trim value might be corrupted. The part cannot be used unless re-trimmed. " |
| Programmer | 3900 |
| Socket Modules | LX2ASMR80LQFR |
| Device Name with Package | Freescale Semiconductor MC9S08AC128CLK QFP(80) |
| Device Name with Package and Adapter | Freescale Semiconductor MC9S08AC128CLK QFP(80) LX2ASMR80LQFR |