| Socket Adapter (click to buy) | Description | Package | Devices Supported | Adapter Capacity per Site | Sockets per Adapter | 3710-MK2, 3610, 4710, 4610 | 1710, 2710M, 2710, 2610, 1610 |
|---|---|---|---|---|---|---|---|
| ASM28SI | Automated SOCKET MODULE, 28 PIN SOIC | SOIC(28) | 10 | 1 | 1 | ✓ | ✓ |
| SM28SI | SOCKET MODULE, 28 PIN SOIC | SOIC(28) | 10 | 1 | 1 | ✓ |
| Device Name | Freescale Semiconductor MC908JB12DW |
| Manufacturer | Freescale Semiconductor |
| Part Number | MC908JB12DW |
| 8-bit Bytes | 65536.0 |
| Vcc(program) | 5.0 |
| Set programming | nan |
| Memory Regions | nan |
| Electrical Erase | Yes |
| Packages | SOIC(28) |
| Notes | IMPORTANT: Microcontroller with FLASH. The following describes the Data Pattern setup: The addresses $CA00 to $F9FF are FLASH. The addresses $FFD0 to $FFFF are user vectors. Please use Secure command to program the monitor mode security address $FFD1. Secure will program the security address $FFD1 with data from Data Pattern address $FFD1. The monitor commands can be disabled by writing $7B to the address $FFD1. After the monitor mode security is set read of FLASH is disabled. FLASH can only be mass erased. This device has an eight bytes security feature from $FFF6 to $FFFD. To read a programmed device with the security feature the Data Pattern or Device > Configure must be filled with correct data from address $FFF6 to $FFFD. Incorrect data at these locations will prevent access to the device. " |
| Programmer | 2710 |
| Socket Modules | SM28SI, ASM28SI |
| Device Name with Package | Freescale Semiconductor MC908JB12DW SOIC(28) |
| Device Name with Package and Adapter | Freescale Semiconductor MC908JB12DW SOIC(28) SM28SI, ASM28SI |