| Socket Adapter (click to buy) | Description | Package | Devices Supported | Adapter Capacity per Site | Sockets per Adapter | Replacement Socket Card | 2900L, 2900, 1900 | 1710, 2710M, 2710, 2610, 1610 |
|---|---|---|---|---|---|---|---|---|
| SM08DFNA | SOCKET MODULE, 8 PIN DFN | LAP(8) | 22 | 1 | 1 | WSM08DFNA | ✓ | |
| WSM08DFNA | REPLACEMENT SOCKET | LAP(8) | 22 | 1 | 1 | ✓ |
| Device Name | Freescale Semiconductor MC68HC908QT4CFQ |
| Manufacturer | Freescale Semiconductor |
| Part Number | MC68HC908QT4CFQ |
| 8-bit Bytes | 65536.0 |
| Vcc(program) | 5.0 |
| Set programming | nan |
| Memory Regions | nan |
| Electrical Erase | Yes |
| Packages | LAP(8) |
| Notes | IMPORTANT: Microcontroller with FLASH.The following describes the buffer setup:The addresses $EE00 to $FDFF are Flash.The addresses $FFB0 to $FFBD are Flash.The addresses $FFC2 to $FFCF are Flash.The addresses $FFD0 to $FFFF are Flash User Vectors.The address $FFBE is FLASH Block Protection Register(FLBPR).This device has an eight bytes security feature from $FFF6 to $FFFD. To read aprogrammed device with the security feature the buffer or Device/Configure mustbe filled with correct data from address $FFF6 to $FFFD. Incorrect data at theselocations will prevent access to the device. Erasing the device will erase the clock trim valuesstored at locations $FFC0 and $FFC1. If these values need to be saved on blank devicesfrom the Factory disable erase before program. |
| Programmer | 1900 |
| Socket Modules | WSM08DFNA |
| Device Name with Package | Freescale Semiconductor MC68HC908QT4CFQ LAP(8) |
| Device Name with Package and Adapter | Freescale Semiconductor MC68HC908QT4CFQ LAP(8) WSM08DFNA |