| Socket Adapter (click to buy) | Description | Package | Devices Supported | Adapter Capacity per Site | Sockets per Adapter | Adapter Price | 3710-MK2, 3610, 4710, 4610 | 1710, 2710M, 2710, 2610, 1610 |
|---|---|---|---|---|---|---|---|---|
| ASM52PD | Automated SOCKET MODULE, 52 PIN PLCC | PLCC(52) | 198 | 1 | 1 | $883.40 | ✔ | ✔ |
| SM52PD | MODIFY FASM52PC FOR MOTOROLA | PLCC(52) | 198 | 1 | 1 | $517.63 | ✔ |
| Device Name | Freescale Semiconductor MC68HC908AS32AMFN |
| Manufacturer | Freescale Semiconductor |
| Part Number | MC68HC908AS32AMFN |
| 8-bit Bytes | 65536.0 |
| Vcc(program) | 5 |
| Set programming | nan |
| Memory Regions | nan |
| Electrical Erase | Yes |
| Packages | PLCC(52) |
| Notes | IMPORTANT: Microcontroller with FLASH and EEPROM. The following describes the buffer setup: EEPROM at locations [$0800-$09FF] ($FF when blank).FLASH at locations [$8000-$FDFF] ($FF when blank).Registers EEDIVHNVR at $FE10 EEDIVLNVR at $FE11 ($FF when blank);EENVR at $FE1C (factory programmed $F0);FLBPR at $FF80 ($FF when blank).Vectors at locations [$FFDA-$FFFF] ($FF when blank).Security bytes at [$FFF6-$FFFD].Other address locations are ignored and should be set to $FF to pass Compare.To read a programmed device the buffer must be filled with correct data at addresses [$FFF6-$FFFD].Make sure to fill buffer with right data for the EEDIVHNVR and the EENVR registers.These registers have one time programmable bits that protect portions of EEPROM permanently.The Erase command erases the FLASH only. |
| Programmer | 2710 |
| Socket Modules | SM52PD, ASM52PD |
| Device Name with Package | Freescale Semiconductor MC68HC908AS32AMFN PLCC(52) |
| Device Name with Package and Adapter | Freescale Semiconductor MC68HC908AS32AMFN PLCC(52) SM52PD, ASM52PD |