| Socket Adapter (click to buy) | Description | Package | Devices Supported | Adapter Capacity per Site | Sockets per Adapter | 2900L, 3910, 4910, 3928, 3901, 3900, 2900, 4900, 1900 | 3800, 2800, 4800 |
|---|---|---|---|---|---|---|---|
| FVE4ASM100TQFQ | Automated SOCKET CARD, 100 PIN QFP | TQFP(100) | 7 | 2, 3 or 4 | 1 | ✓ | ✓ |
| FVE4ASMR100TQFQ | Automated SOCKET CARD, 100 PIN QFP | TQFP(100) | 7 | 2, 3 or 4 | 1 | ✓ | ✓ |
| Device Name | Cypress CY8C5868AXI-LP032 |
| Manufacturer | Cypress |
| Part Number | CY8C5868AXI-LP032 |
| 8-bit Bytes | nan |
| Vcc(program) | 1.9 |
| Set programming | nan |
| Memory Regions | 0h-7FFFh; 8000h-FFFFh; 1 0000h-1 7FFFh; 1 8000h-1 FFFFh; 4800 0000h-4800 0001h; 4808 0000h-4808 0001h; |
| Electrical Erase | Yes |
| Packages | TQFP(100) |
| Notes | IMPORTANT: The data pattern is organized in below order: 1) Program Flash Memory: [0x0000-0x3FFFF] 2) Program Device Configure Nonvolatile Latch: [0x90000000-0x90000003] 3) Program Write Once Nonvolatile Latch: [0x90100000-0x90100003] This algoritm support only ECC enable bit 1". ECC enable bit is bit 3 of byte 3 located at address 0x90000003. The following memory maps and options are not support in this algorithm: 1) Program Flash Protection Data [0x90400000-0x904000FF] 2) Flash error correcting code (ECC) disabled("0") 3) Flash Configuration Data [0x80000000-0x80007FFF] 4) EEPROM [0x90200000-0x9020003F] " |
| Programmer | 3900 |
| Socket Modules | FVE4ASMR100TQFQ, FVE4ASM100TQFQ |
| Device Name with Package | Cypress CY8C5868AXI-LP032 TQFP(100) |
| Device Name with Package and Adapter | Cypress CY8C5868AXI-LP032 TQFP(100) FVE4ASMR100TQFQ, FVE4ASM100TQFQ |