| Socket Adapter (click to buy) | Description | Package | Devices Supported | Adapter Capacity per Site | Sockets per Adapter | Adapter Price | 2900L, 3910, 4910, 3928, 3901, 3900, 2900, 4900, 1900 | 3800, 2800, 4800 |
|---|---|---|---|---|---|---|---|---|
| FVE4ASMR32QFNEA | Automated SOCKET CARD, 32 PIN QFN | LAP(32) | 30 | 2, 3 or 4 | 1 | $443.12 | ✔ | ✔ |
| Device Name | Atmel ATmega8-16MUR (ID=9307h) |
| Manufacturer | Atmel |
| Part Number | ATmega8-16MUR (ID=9307h) |
| 8-bit Bytes | 8704.0 |
| Vcc(program) | 5 |
| Set programming | nan |
| Memory Regions | 0h-1FFFh; 2000h-21FFh; |
| Electrical Erase | Yes |
| Packages | LAP(32) |
| Notes | IMPORTANT: In the Data Pattern addresses [0000h-1FFFh] are for Flash Memory and addresses [2000h-21FFh] are for EEPROM Data Memory. There is four Calibration Bytes residing in the signature row high byte of addresses 0h 1h 2h and 3h for 1.0MHz 2.0MHz 4.0MHz and 8.0MHz internal RC Oscillator calibration. To program one of these four Calibration Bytes into the memory under Device > Configure 1)Set CALIBRATION to ENABLE 2)Set CAL BYTE ADDRESS to one of the four Calibration Byte addresses (00h-03h). 3)Set CALIBRATION ADDRESS to the memory address [00000h-21FFh] you want to program the Calibration Byte to. New devices may automatically calibrate the RC Oscillator. Please set the CALIBRATION option to DISABLE(default) to use automatic calibration. |
| Programmer | 3900 |
| Socket Modules | FVE4ASMR32QFNEA |
| Device Name with Package | Atmel ATmega8-16MUR (ID=9307h) LAP(32) |
| Device Name with Package and Adapter | Atmel ATmega8-16MUR (ID=9307h) LAP(32) FVE4ASMR32QFNEA |