| Socket Adapter (click to buy) | Description | Package | Devices Supported | Adapter Capacity per Site | Sockets per Adapter | Adapter Price | Replacement Socket Card | 2900L, 2900, 1900 | 3710-MK2, 3610, 4710, 4610 | 1710, 2710M, 2710, 2610, 1610, 1410/84, 1410 |
|---|---|---|---|---|---|---|---|---|---|---|
| ASMR32MLFM | Automated SOCKET MODULE, 32 PIN MLF | LAP(32) | 18 | 1 | 1 | $882.90 | LASMR32MLFM | ✔ | ✔ | |
| LASMR32MLFM | Automated REPLACEMENT D-CARD | LAP(32) | 18 | 1 | 1 | $486.53 | ✔ | |||
| SMR32MLFM | SOCKET MODULE, 32 PIN MLF | LAP(32) | 18 | 1 | 1 | $1,061.13 | LASMR32MLFM | ✔ |
| Device Name | Atmel ATmega328-MU(Calibration) (ID=950Fh) |
| Manufacturer | Atmel |
| Part Number | ATmega328-MU(Calibration) (ID=950Fh) |
| 8-bit Bytes | 33792.0 |
| Vcc(program) | 5.0 |
| Set programming | nan |
| Memory Regions | nan |
| Electrical Erase | Yes |
| Packages | LAP(32) |
| Notes | IMPORTANT: In the Buffer address [0000h-7FFFh] is the FLASH Program Memory and address [8000h-83FFh]is the EEPROM Data MemoryThis support is designed to calibrate the device to +\- 2 percent of 8 MHz.There is a factory calibration Byte residing in the signature rowhigh byte of address 0h for 8.0MHz internal RC Oscillator calibration.Please use Atmel ATmega328-M for the support of factory calibration value.Enabling CALIBRATION under Device Configure will calibrate the deviceto +\- 2 percent of 8 MHz using a 32.768 KHz clock. Then the calibrationvalue is programmed to an assigned address in the flash or EEPROM. Thisaddress can be assigned in CALIBRATION ADDRESS under Device Configure.Calibration result is valid to the socket module used to program the device.Results may vary for different operating conditions. |
| Programmer | 1900 |
| Socket Modules | LASMR32MLFM |
| Device Name with Package | Atmel ATmega328-MU(Calibration) (ID=950Fh) LAP(32) |
| Device Name with Package and Adapter | Atmel ATmega328-MU(Calibration) (ID=950Fh) LAP(32) LASMR32MLFM |