Socket Adapters and Programmers Supporting Atmel ATmega32-16AU (ID=9502h) QFP(44)
| Socket Adapter (click to buy) | Description | Package | Devices Supported | Adapter Capacity per Site | Sockets per Adapter | 2900L, 3910, 4910, 3928, 3901, 3900, 2900, 4900, 1900 | 3800, 2800, 4800 | 3710-MK2, 3610, 4710, 4610 | 1710, 2710M, 2710, 2610, 1610, 1410/84, 1410 |
|---|
| SM44QC | SOCKET MODULE, 44 PIN TQFP | QFP(44) | 956 | 1 | 1 | | | | ✓ |
| SM44QI | SOCKET MODULE, 44 PIN QFP | QFP(44) | 957 | 1 | 1 | | | | ✓ |
Note: The following adapters are currently obsolete: Note: adapter_name=ASM44TQ part_number=FASM44TQ is marked obsolete because Activity Code is O.
Note: adapter_name=ASM44TQA part_number=FASM44TQA is marked obsolete because Activity Code is O.
Note: adapter_name=ASM44TQD part_number=FASM44TQD is marked obsolete because Activity Code is O.
Note: adapter_name=ASM44TQE part_number=FASM44TQE is marked obsolete because Activity Code is O.
Note: adapter_name=ASM44TQF part_number=FASM44TQF is marked obsolete because Activity Code is O.
Note: adapter_name=ASM44TQN part_number=FASM44TQN is marked obsolete because Activity Code is O.
Note: adapter_name=ASM44TQS part_number=FASM44TQS is marked obsolete because Activity Code is O.
Note: adapter_name=ASM44TQY part_number=FASM44TQY is marked obsolete because Activity Code is O.
Note: adapter_name=FVE4ASMR44TQFQ part_number=FVE4ASMR44TQFQ is marked obsolete because Activity Code is O.
Note: adapter_name=SM44TQ part_number=FSM44TQ is marked obsolete because Activity Code is O.
Note: adapter_name=SM44TQA part_number=FSM44TQA is marked obsolete because Activity Code is O.
Note: adapter_name=SM44TQD part_number=FSM44TQD is marked obsolete because Activity Code is O.
Note: adapter_name=SM44TQE part_number=FSM44TQE is marked obsolete because Activity Code is O.
Note: adapter_name=SM44TQF part_number=FSM44TQF is marked obsolete because Activity Code is O.
Note: adapter_name=SM44TQN part_number=FSM44TQN is marked obsolete because Activity Code is O.
Note: adapter_name=SM44TQS part_number=FSM44TQS is marked obsolete because Activity Code is O.
Note: adapter_name=SM44TQY part_number=FSM44TQY is marked obsolete because Activity Code is O.
Device Parameters
| Device Name | Atmel ATmega32-16AU (ID=9502h) |
| Manufacturer | Atmel |
| Part Number | ATmega32-16AU (ID=9502h) |
| 8-bit Bytes | 33792.0 |
| Vcc(program) | 5.0 |
| Set programming | nan |
| Memory Regions | 0h-7FFFh; 8000h-83FFh; |
| Electrical Erase | Yes |
| Packages | QFP(44) |
| Notes | IMPORTANT: | Device Type: | 8-bit Microcontroller | | Device Size: | 32k Bytes In-system Programmable Flash | Memory Organization: | Memory Type | Attributes(*) | Included in default Range (Y/N) | DUT Physical Byte Address(hex)(if this area is selected/Activated) | BPWin Buffer Byte Address(hex) | | Main Flash Area | R/W/E | Yes | 0000_0000 - 0000_7FFF | 0000_0000 - 0000_7FFF | | EEPROM Data Memory | R/W/E | No | 0000_8000-0000_83FF | 0000_8000-0000_83FF | | | | | | | Default Algorithm Range | --- | --- | 0000_0000 - 0000_83FF | 0000_0000 - 0000_83FF | * R:Read only W:One time programmable (OTP) R/W:readable and one time programmable (OTP) R/W/E:readable and rewritable if not locked. Any configurations listed under Device-Specific" in the menu item Device-> Settings will be written to the DUT during "Program" operation regardless of memory range selection. Special Device Considerations: | In the Data Pattern addresses [0000h-7FFFh] are for Flash Memory and addresses [8000h-83FFh] are for EEPROM Data Memory. There is four Calibration Bytes residing in the signature row high byte of addresses 0h 1h 2h and 3h for 1.0MHz 2.0MHz 4.0MHz and 8.0MHz internal RC Oscillator calibration. To program one of these four Calibration Bytes into the memory under Device > Configure 1)Set CALIBRATION to ENABLE 2)Set CAL BYTE ADDRESS to one of the four Calibration Byte addresses (00h-03h). 3)Set CALIBRATION ADDRESS to the memory address [00000h-83FFh] you want to program the Calibration Byte to. New devices may automatically calibrate the RC Oscillator. Please set the CALIBRATION option to DISABLE(default) to use automatic calibration. | " |
| Programmer | 3900 |
| Socket Modules | FVE4ASMR44TQFQ (disc.) |
| Device Name with Package | Atmel ATmega32-16AU (ID=9502h) QFP(44) |
| Device Name with Package and Adapter | Atmel ATmega32-16AU (ID=9502h) QFP(44) FVE4ASMR44TQFQ (disc.) |