| Socket Adapter (click to buy) | Description | Package | Devices Supported | Adapter Capacity per Site | Sockets per Adapter | Adapter Price | Replacement Socket Card | 2900L, 2900, 1900 | 3710-MK2, 3610, 4710, 4610 | 1710, 2710M, 2710, 2610, 1610, 1410/84, 1410 |
|---|---|---|---|---|---|---|---|---|---|---|
| ASMR32MLFA | Automated SOCKET MODULE, 32 PIN MLF | LAP(32) | 81 | 1 | 1 | $1,298.00 | WASMR32MLFA | ✔ | ✔ | |
| ASMR32MLFR | Automated SOCKET MODULE, 32 PIN MLF | LAP(32) | 74 | 1 | 1 | $1,023.50 | LX4ASMR32MLFR | ✔ | ✔ | |
| LX4ASMR32MLFR | Automated REPLACEMENT D-CARD | LAP(32) | 78 | 2, 3 or 4 | 1 | $672.82 | ✔ | |||
| SM32MLF | SOCKET MODULE, 32 MLF ATMEL | LAP(32) | 103 | 1 | 1 | $850.00 | ✔ | |||
| SMR32MLFA | SOCKET MODULE, 32 PIN MLF | LAP(32) | 81 | 1 | 1 | $962.61 | WASMR32MLFA | ✔ | ||
| SMR32MLFR | SOCKET MODULE, 32 PIN MLF | LAP(32) | 74 | 1 | 1 | $1,330.00 | LX4ASMR32MLFR | ✔ | ||
| WASMR32MLFA | Automated REPLACEMENT SOCKET | LAP(32) | 85 | 1 | 1 | $455.00 | ✔ |
| Device Name | Atmel ATmega168V-MU (ID=9406h) |
| Manufacturer | Atmel |
| Part Number | ATmega168V-MU (ID=9406h) |
| 8-bit Bytes | 16896.0 |
| Vcc(program) | 5.0 |
| Set programming | nan |
| Memory Regions | nan |
| Electrical Erase | Yes |
| Packages | LAP(32) |
| Notes | IMPORTANT: Socket module information has been updated in revision 1.3.The following were removed as valid modules: ASM32MLFA.In the Buffer address [0000h-3FFFh] is for FLASH Program Memory and address [4000h-41FFh]is for EEPROM Data Memory. There is one Calibration Byte residing in the signature rowhigh byte of address 0h for 8.0MHz internal RC Oscillator calibration.To program this calibration byte into the memory in Device > Configure1)Set CALIBRATION to ENABLE2)Set CAL BYTE ADDRESS to Calibration Byte address 00h.3)Set CALIBRATION ADDRESS to the memory address [0000h-41FFh] you want to program the Calibration Byte.New devices may automatically calibrate the RC Oscillator.Please set the CALIBRATION option to DISABLE(default) to use automatic calibration.COMPARE operation will only verify data read from the deviceagainst data in the Buffer. The Calibration byte will be ignored during compare regardlessof the Calibration settings in Device > Configure. |
| Programmer | 1900 |
| Socket Modules | WASMR32MLFA, LX4ASMR32MLFR |
| Device Name with Package | Atmel ATmega168V-MU (ID=9406h) LAP(32) |
| Device Name with Package and Adapter | Atmel ATmega168V-MU (ID=9406h) LAP(32) WASMR32MLFA, LX4ASMR32MLFR |