| Socket Adapter (click to buy) | Description | Package | Devices Supported | Adapter Capacity per Site | Sockets per Adapter | Adapter Price | 2900L, 3910, 4910, 3928, 3901, 3900, 2900, 4900, 1900 | 3800, 2800, 4800 |
|---|---|---|---|---|---|---|---|---|
| FVE4ASMR64QFNZ | Automated SOCKET CARD, 64 PIN QFN | QFN(64) | 10 | 2, 3 or 4 | 1 | $731.96 | ✔ | ✔ |
| Device Name | Atmel ATMEGA256RFR2-ZFR (ID=A802h) |
| Manufacturer | Atmel |
| Part Number | ATMEGA256RFR2-ZFR (ID=A802h) |
| 8-bit Bytes | nan |
| Vcc(program) | 3.3 |
| Set programming | nan |
| Memory Regions | 0h-1FFFFh; 20000h-20FFFh; |
| Electrical Erase | Yes |
| Packages | QFN(64) |
| Notes | IMPORTANT: Buffer address range 0-3FFFFh is for FLASH Memory and 40000h-41FFFh is for EEPROM Data Memory. Erase will clear the Configuration Bits. Due to parallel programming mode specifications device will only beverified from 4.5V to 5.5V.Calibration information may be programmed to any location in the device through the Device Configure menu.New devices may automatically calibrate the RC Oscillator.Please set the CALIBRATION option to DISABLE(default) to use automatic calibration. Fuse Low Byte Fuse High Byte and Extended Fuse Byte can be set under Device Configure menu. The fuses are mapped to the fuse bytes as follows: - Fuse Low Byte: Bit7[CKDIV8 CKOUT SUT1 SUT0 CKSEL3 CKSEL2 CKSEL1 CKSEL0]Bit0 - Fuse High Byte: Bit7[OCDEN JTAGEN SPIEN WDTON EESAVE BOOTSZ1 BOOTSZ0 BOOTRST]Bit0- Extended Fuse Byte: Bit7[1 1 1 1 Reserved BODLEVEL2 BODLEVEL1 BODLEVEL0]Bit0.Please refer to the device specifications for detailed information.COMPARE operation will only verify data read from the device against data in the buffer. |
| Programmer | 3900 |
| Socket Modules | FVE4ASMR64QFNZ |
| Device Name with Package | Atmel ATMEGA256RFR2-ZFR (ID=A802h) QFN(64) |
| Device Name with Package and Adapter | Atmel ATMEGA256RFR2-ZFR (ID=A802h) QFN(64) FVE4ASMR64QFNZ |