| Socket Adapter (click to buy) | Description | Package | Devices Supported | Adapter Capacity per Site | Sockets per Adapter | Adapter Price | 2900L, 3910, 4910, 3928, 3901, 3900, 2900, 4900, 1900 | 3800, 2800, 4800 |
|---|---|---|---|---|---|---|---|---|
| FVE2ASMR64PQAC | Automated SOCKET CARD, 64 PIN QFP | QFP(64) | 12 | 2 | 1 | $530.00 | ✔ | ✔ |
| Device Name | Atmel ATMEGA128L-16AU(Custom01) (ID=9702h) |
| Manufacturer | Atmel |
| Part Number | ATMEGA128L-16AU(Custom01) (ID=9702h) |
| 8-bit Bytes | nan |
| Vcc(program) | 5.0 |
| Set programming | nan |
| Memory Regions | 0h-FFFFh; 10000h-107FFh; |
| Electrical Erase | Yes |
| Packages | QFP(64) |
| Notes | IMPORTANT: This is a custom algorithm that allows the user to set certain parameters.These parameters are Range Check VPP VCC tWLRH and tWLRH_CE.They can be set from the device specific menu.Buffer address range 0-1FFFFh is for FLASH Memory and 20000h-20FFFh isfor EEPROM Data Memory. Erase will clear the Configuration Bits.Due to parallel programming mode specifications device will only beverified at 4.5V and 5.5V.You may program the Calibration informationto any location in the device through the Device Config/Setting.New devices may automatically calibrate the RC Oscillator.Please set the CALIBRATION option to DISABLE(default) to use automatic calibration.You also can set the fuse from Fuse Low Byte Fuse High Byte and Extended Fuse Byteunder Device Config/Setting menu. The fuses are mapped into the fuse bytes in the followingway. Fuse Low Byte: [Bit0:CKSEL0 Bit1:CKSEL1 Bit2:CKSEL2 Bit3:CKSEL3 Bit4:SUT0 Bit5:SUT1Bit6:BODEN Bit7:BODLEVEL]. Fuse High Byte: [Bit0:BOOTRST Bit1:BOOTSZ0 Bit2:BOOTSZ1Bit3: EESAVE Bit4:CKOPT Bit5:SPIEN Bit6:JTAGEN Bit7:OCDEN].Extended Fuse Byte: [Bit0:WDTON Bit1:M103C].Please refer to the device specifications for detailed information.CAL BYTE ADDRESS menu has been added in Device Config/Setting to select one of theaddresses (0h-3h) in the signature row high byte for 1 2 4 or 8 MHz internal RC Oscillator Calibration.BLB01..2 has been corrected to BLB02..1 and BLB11..2 has been corrected to BLB12..1 in Device Config/Settingto correspond the display with the programming bits.If CALIBRATION option is ENABLE compare will fail for the calibration byte location. |
| Programmer | 3900 |
| Socket Modules | FVE2ASMR64PQAC |
| Device Name with Package | Atmel ATMEGA128L-16AU(Custom01) (ID=9702h) QFP(64) |
| Device Name with Package and Adapter | Atmel ATMEGA128L-16AU(Custom01) (ID=9702h) QFP(64) FVE2ASMR64PQAC |