| Socket Adapter (click to buy) | Description | Package | Devices Supported | Adapter Capacity per Site | Sockets per Adapter | Adapter Price | 3710-MK2, 3610, 4710, 4610 | 1710, 2710M, 2710, 2610, 1610 |
|---|---|---|---|---|---|---|---|---|
| ASM64TQA | Automated SOCKET MODULE, 64 PIN TQFP | QFP(64) | 230 | 1 | 1 | $1,150.00 | ✔ | ✔ |
| SM64TQA | SOCKET MODULE, 64TQFP, ACTEL | QFP(64) | 230 | 1 | 1 | $885.00 | ✔ |
| Device Name | Atmel AT89C51CC03CA-RDTUM (ID=FFFEh) |
| Manufacturer | Atmel |
| Part Number | AT89C51CC03CA-RDTUM (ID=FFFEh) |
| 8-bit Bytes | 69632.0 |
| Vcc(program) | 5.0 |
| Set programming | nan |
| Memory Regions | nan |
| Electrical Erase | Yes |
| Packages | QFP(64) |
| Notes | IMPORTANT: Microcontroller with Flash.In the Buffer 64KB User Memory is mapped into 0000h-FFFFh2KB Data Memory (EEPROM) is mapped into 10000h-107FFh and2KB Boot Memory is mapped into 10800h-10FFFh.The Data Memory and Boot Memory are treated as a single block.Each block can be ERASED/PROGRAMMED separately by setting Ranges under Device/Options.The following range setting corresponds to each block: 00000h-0FFFFh (Flash Memory)10000h-10FFFh (Data Memory and Boot Memory)Part can be secured by programming Lock bits 0 through 2 of HSB using Secure command.Bit 0 (LB0): Parallel programming is disabled.Bit 1 (LB1): Parallel program/verify are disabled.Bit 2 (LB2): Parallel program/verify/external execution are disabled.Bits 3 4 5 of HSB are reserved bits. Bits 6 7 of HSB are set under Device\Configure (X2 & BLJ).Device\Configure has the XAF parameters necessary when programming a CAN bootloader into Boot memory area.Check electronic identifiers (ID)" must be ENABLED under Device/Options. " |
| Programmer | 2710 |
| Socket Modules | SM64TQA, ASM64TQA |
| Device Name with Package | Atmel AT89C51CC03CA-RDTUM (ID=FFFEh) QFP(64) |
| Device Name with Package and Adapter | Atmel AT89C51CC03CA-RDTUM (ID=FFFEh) QFP(64) SM64TQA, ASM64TQA |