| Socket Adapter (click to buy) | Description | Package | Devices Supported | Adapter Capacity per Site | Sockets per Adapter | 3710-MK2, 3610, 4710, 4610 | 1710, 2710M, 2710, 2610, 1610, 1410/84, 1410 |
|---|---|---|---|---|---|---|---|
| ASM52P | Automated SOCKET MODULE, 52 PIN PLCC | PLCC(52) | 282 | 1 | 1 | ✓ | ✓ |
| ASM52PC | Automated SOCKET MODULE, 52 PIN PLCC | PLCC(52) | 300 | 1 | 1 | ✓ | ✓ |
| ASM52PD | Automated SOCKET MODULE, 52 PIN PLCC | PLCC(52) | 198 | 1 | 1 | ✓ | ✓ |
| ASM52PI | Automated SOCKET MODULE, 52 PIN PLCC | PLCC(52) | 221 | 1 | 1 | ✓ | ✓ |
| SM52P | SOCKET MODULE, 52 PIN PLCC | PLCC(52) | 282 | 1 | 1 | ✓ | |
| SM52PA | SOCKET MODULE, 52 PIN PLCC | PLCC(52) | 282 | 1 | 1 | ✓ | |
| SM52PC | SOCKET MODULE,52PLCC,MOTOROLA | PLCC(52) | 300 | 1 | 1 | ✓ | |
| SM52PCA | SOCKET MODULE, 52 PLCC, | PLCC(52) | 300 | 1 | 1 | ✓ | |
| SM52PD | MODIFY FASM52PC FOR MOTOROLA | PLCC(52) | 198 | 1 | 1 | ✓ | |
| SM52PH | SOCKET MODULE, 52 PLCC | PLCC(52) | 282 | 1 | 1 | ✓ | |
| SM52PI | MODIFY FASM52PI FOR INTEL | PLCC(52) | 221 | 1 | 1 | ✓ | |
| SM52PMBW | MODIFIED FSM52P FOR MOTOROLA | PLCC(52) | 251 | 1 | 1 | ✓ | |
| SM84UP | SOCKET MODULE, UNIVERSAL PLCC | PLCC(52) | 5988 | 1 | 1 | ✓ |
| Device Name | Atmel AT89C51CC03C-S3SIM (ID=FFFEh) |
| Manufacturer | Atmel |
| Part Number | AT89C51CC03C-S3SIM (ID=FFFEh) |
| 8-bit Bytes | 69632.0 |
| Vcc(program) | 5.0 |
| Set programming | nan |
| Memory Regions | nan |
| Electrical Erase | Yes |
| Packages | PLCC(52) |
| Notes | IMPORTANT: Code Revision 1.1 updated PLCC52 pin out to match Rev C programming specification from Atmel.Microcontroller with Flash.In the Buffer 64KB User Memory is mapped into 0000h-FFFFh2KB Data Memory (EEPROM) is mapped into 10000h-107FFh and2KB Boot Memory is mapped into 10800h-10FFFh.The Data Memory and Boot Memory are treated as a single block.Each block can be ERASED/PROGRAMMED separately by setting Ranges under Device Options.The following range setting corresponds to each block: 00000h-0FFFFh (Flash Memory)10000h-10FFFh (Data Memory and Boot Memory)Part can be secured by programming Lock bits 0 through 2 of HSB using Secure command.Bit 0 (LB0): Parallel programming is disabled.Bit 1 (LB1): Parallel program/verify are disabled.Bit 2 (LB2): Parallel program/verify/external execution are disabled.Bits 3 4 5 of HSB are reserved bits. Bits 6 7 of HSB are set under Device Configure (X2 & BLJ).Device Configure has the XAF parameters necessary when programming a CAN bootloader into Boot memory area.Check electronic identifiers (ID)" must be ENABLED under Device/Options.Certain combinations of Configure options and Boot memory may not allow the device to runcorrectly for a stand alone verify. " |
| Programmer | 2710 |
| Socket Modules | SM52PC, SM52PCA, SM52P, SM52PA, SM52PH, SM52PMBW, SM52PI, SM52PD, SM84UP, ASM52PC, ASM52P, ASM52PI, ASM52PD, SM84AH (disc.), SM84UPB (disc.), SM84AHA (disc.) |
| Device Name with Package | Atmel AT89C51CC03C-S3SIM (ID=FFFEh) PLCC(52) |
| Device Name with Package and Adapter | Atmel AT89C51CC03C-S3SIM (ID=FFFEh) PLCC(52) SM52PC, SM52PCA, SM52P, SM52PA, SM52PH, SM52PMBW, SM52PI, SM52PD, SM84UP, ASM52PC, ASM52P, ASM52PI, ASM52PD, SM84AH (disc.), SM84UPB (disc.), SM84AHA (disc.) |