| Socket Adapter (click to buy) | Description | Package | Devices Supported | Adapter Capacity per Site | Sockets per Adapter | Adapter Price | 3710-MK2, 3610, 4710, 4610 | 1710, 2710M, 2710, 2610, 1610, 1410/84, 1410 |
|---|---|---|---|---|---|---|---|---|
| ASM28T | Automated SOCKET MODULE, 28 PIN TSOP | TSOP(28) | 131 | 1 | 1 | $525.77 | ✔ | ✔ |
| SM28T | SOCKET MODULE, 28 PIN TSOP | TSOP(28) | 131 | 1 | 1 | $659.33 | ✔ | |
| SM28TM | SOCKET MODULE, 28 PIN TSOP | TSOP(28) | 131 | 1 | 1 | $630.12 | ✔ |
| Device Name | Atmel AT45DB642D-TU(1024 byte page) (ID=2800h) |
| Manufacturer | Atmel |
| Part Number | AT45DB642D-TU(1024 byte page) (ID=2800h) |
| 8-bit Bytes | 8388736.0 |
| Vcc(program) | 3.3 |
| Set programming | Yes |
| Memory Regions | 0h-7FFFFFh; 800000h-80007Fh; |
| Electrical Erase | Yes |
| Packages | TSOP(28) |
| Notes | IMPORTANT: 64-megabit DataFlash.This algorithm supports 1024 bytes per Page. Please make sure the data file is in 1024 bytes per Page format.This device is set to 1056 bytes per Page by default at the factory. A confirmation dialog will be displayed if 1056 bytes per Page device is detected. If accepted the configuration register of the device will be programmed to 1024 byes per Page permanently. Otherwise the executed operation will be aborted. A seperate 1056 byte page device selection is available for the 1056 bytes per Page device with 1056 bytes per Page format data file.***1024 and 1056 devices should not be mixed when running a job in Concurrent mode.***Erase before programming must be enabled if the state of the deviceis uncertain. The device has a 128-byte Security Register. The first 64 bytes are the one-time user programmable space and the remaining 64 bytes are factory programmed by Atmeland will contain a unique number for each device. The factory programmed data is fixed and cannotbe changed. The User Programmable Space is located in Buffer addresses [800000h-80003Fh]. Ifthe User Programmable Space is not blank Erase will fail on this area. The default Device Range is set to [000000h-7FFFFFh]. Please select Entire File" under Device Range if the User Programmable Space needs to be included. The Sector Protection Register can be set in Device Configure. Sector LockDown can be set in Device Configure. Once a sector is locked down Erase and Program will fail.The sector then cannot be unlocked. " |
| Programmer | 2710 |
| Socket Modules | SM28T, SM28TM, ASM28T |
| Device Name with Package | Atmel AT45DB642D-TU(1024 byte page) (ID=2800h) TSOP(28) |
| Device Name with Package and Adapter | Atmel AT45DB642D-TU(1024 byte page) (ID=2800h) TSOP(28) SM28T, SM28TM, ASM28T |