| Socket Adapter (click to buy) | Description | Package | Devices Supported | Adapter Capacity per Site | Sockets per Adapter | Adapter Price | 2900L, 3910, 4910, 3928, 3901, 3900, 2900, 4900, 1900 | 3800, 2800, 4800 |
|---|---|---|---|---|---|---|---|---|
| FVE4ASMR40QFNR | Automated SOCKET CARD, 40 PIN QFN | QFN(40) | 32 | 2, 3 or 4 | 1 | $413.66 | ✔ | ✔ |
| Device Name | Microchip Technology PIC16F1934-E/MV (ID=0h) |
| Manufacturer | Microchip Technology |
| Part Number | PIC16F1934-E/MV (ID=0h) |
| 8-bit Bytes | nan |
| Vcc(program) | 5.0 |
| Set programming | nan |
| Memory Regions | 0h-FFFh; F000h-F0FFh; |
| Electrical Erase | Yes |
| Packages | QFN(40) |
| Notes | IMPORTANT: Erasing the device will erase Program Memory along with the Configuration and ID bits but not Calibration words! The Calibration words are skipped during all device operations. The ID locations are addressed in the Data Pattern at [10000h-10007h]. It is recommended by manufacturer that the user use only the seven Least Significant Bits of each ID locations and the remaining bits are masked to 1s during programming. Configuration words are located at Data Pattern addresses [1000Eh(LSB)-1000Fh(MSB)] and [10010h(LSB)-10011(MSB)]. IDs and Configuration may be set under Device > Configure or from the above mentioned addresses in Data Pattern. Program Memory (14-bits wide) is addressed in the Data Pattern at [000h-1FFFh]. EEPROM (Data Memory) is addressed in the Data Pattern at [1E000h-1E1FFh]. EEPROM is only 8-bits wide. The Sum command is to generate the checksum calculation as specified by Microchip. |
| Programmer | 3900 |
| Socket Modules | FVE4ASMR40QFNR |
| Device Name with Package | Microchip Technology PIC16F1934-E/MV (ID=0h) QFN(40) |
| Device Name with Package and Adapter | Microchip Technology PIC16F1934-E/MV (ID=0h) QFN(40) FVE4ASMR40QFNR |